The kit you would  purchase is the one in the picture so there are no size or colour options, If you would like to configure your own Ludwig kit you can call the store on 0114 247 2200 and we can put together the kit you want.

Classic Maple Shell Construction
Proudly made in Monroe, North Carolina, Ludwig takes great care in selecting only the finest quality materials for Classic Maple drums.

This process starts with select North American maple. The maple is cut into panels. The outside panel is 1.8mm thick, two ply, cross laminated maple. Cross lamination is the process in which the panels are made of two glued plies of wood, with the grain direction of one ply at 90 degrees in relation to the grain direction of the adjacent ply. The outside grain runs circumferential with the shell.

The center panel is 2.4 mm thick, three ply, cross-laminated maple. The middle ply runs circumferential with the shell, and the outer plies are at 90 degrees. The inside panel is 1.8mm thick, two ply, cross laminated maple. The inside grain runs circumferential with the shell. This gives the 7-ply shells a total thickness of 6mm.

The bearing edges are cut to a 45 degree angle within 1/16" from the outside edge. The sharp edges are rounded by light sanding for a smooth even surface. This process results in what is the unmistakable signature Ludwig sound.

Build & Tune Service at Drum Stop

Build & Tune Service available from Drum Stop For Just £39, you can get your Drum Kit Built & Tuned before it Gets Delivered. Take the hassle out of Buying your Drum Kit.  If you are unsure of how to build it, don't have enough time, or it's a present then let us do the hard work for you. Many Drum Kits arrive dis-assembled like Russian Dolls in Boxes.  This means that you have to spend time building each drum by placing the heads on and tightening all the lugs up.  This has to be done on all of the drums and each drum has two heads.  You also then have to spend time tuning the kit before you can play it.  By choosing our Build and Tune Service we Build all the Drums up and put on the Drum Heads for you as well as giving it a basic tune up, so you are ready to play when it arrives.  All you have to do is then unpack and place the drums together wherever you want to play them and just extend the legs and tighten up the pieces of hardware.  Obviously the stands themselves just need opening up and placing where you need them as we can't send built stands by courier as they would just get damaged.  Email us or call for more information on 0114 247 2200.  Some Kits can't benefit from the Build and Tune, so give us a call or look out for the option in the Products themselves when chosing to Buy the Kit